DREYPLAS is distributing new, environmental friendly and high temperature stable type of inorganic flame retardant – Magnesiumhydroxid Mg(OH)2 high purity grade.
DREYPLAS source all flame ratardant materials from selected sources in China.
Magnesiumhydroxide is a material made by Yinrui in Shandong. It is a natural expansion of our activity for high performance, high end products at cost competitive price with German standard logisitics.
Magnesiumhydroxide Mg(OH)2 is recommended to use in the following cases :
- non halogen flame retardant composition
- high temperature (> 200 deg C processing temperature)
- enviroinmental friendly
- low smoke, non toxic
- it may neutralize even acid and corrosive gas during combustion
Our Magnesiumhydroxide powders are widely used in different polymer applications, especially when you require processing temperatures higher than 200 deg C. We offer coated and uncoated materials. Various coatings improve the dispersion and compatibility.
Typical applications are :
- any thermoplastic materials and elastomers with processing T > 200 deg C
- engineering thermoplastics in electrical applications (i.e. connectors)
- automotive wire & cable
- energy/electric cable
- data cable
Typical features of Yinrui Mg(OH)2 :
- purity : 99,8%
- whiteness : min. 97%
- particle size : D50 is 0.7 – 1.1 micron
- particle shape : hexagonal platelet
- specific surface area : BET 6-8m2/gram
overview of available grades | ||
Magnesium hydroxide by Chemical method (99,8% purity): | ||
Specification | Treatment type | Main application |
YR6 | NO | |
YR6A | Vinyl silane | PE,PP,EPDM,Rubber and so on |
YR6C | stearic acid | PVC,PE,Copolymer and Rubber and so on |
YR6E | Compound vinyl silane | PE,PP,EPDM,Rubber and so on |
YR6N | compound amino silane | EVA,EEA,PA Rubber and so on |
YR6G | polymer | PE,PP and so on |
Technical parameters: | ||
Physical status | white powder | |
Mg(OH)2 | 99.8% | |
CaO | Max 0.03% | |
Cl | Max 0.005% | |
Fe | Max 0.005% | |
Whiteness | Min 97 | |
drying shrinkage(120 degree centigrade,1h) | 0.05% | |
D50(particle size) | 0.9-1.3μm | |
particle shape | hexagonal platelet | |
insoluble matter in hydrochloric acid | 0.006% | |
loss on ignition(900 degree centigrade) | Max 30.5% | |
specific surface area | specific surface area | |
6-8 m2/g | 6-8 m2/g | |
mohs hardness | 2.5 | |
bulk density | bulk density | |
450-600 kg/m3 | 450-600 kg/m3 | |
Initial dehydration temperature | 340 degree centigrade | |
electrical conductivity | 391 uS/cm | |
Magnesium hydroxide by mineral method (95,1 % purity): | ||
Specification | Treatment type | Main application |
YRK5 | NO, raw mineral powder | |
YRK4A | compound vinyl silane. | plastic. such as PE,PP EPDM and Rubber and so on |
YRK4N | compound aminosilane | PA,TPE and Polarity PE copolymer(EVA EEA etc) and also Rubber and so on |
Technical parameters: | ||
physical status | white powder | |
Mg(OH)2 | 95.1% | |
CaO | Max 0.79% | |
SiO2 | Max 2.48% | |
Fe2O3 | Max 0.22% | |
Whiteness | Min 94 | |
drying shrinkage(120 degree centigrade,1h) | 0.05% | |
D50(particle size) | 2.5-4μm | |
insoluble matter in hydrochloric acid | 0.006% | |
loss on ignition(900 degree centigrade) | Max 30% | |
mohs hardness | 2.5 | |
Initial dehydration temperature | 340 degree centigrade |